Why does my reel spin backwards

Friday, November 12, Sign in. Forgot your password? Get help. Privacy Policy. Password recovery. Catch and Fillet.

Contents hide. Can You Eat a Monkfish? Can You Eat a Ladyfish? Can You Eat a Hogfish? Disclaimer: Some recommended products may use affiliate links. Amazon and the Amazon logo are trademarks of Amazon. Start the repair by checking the most obvious fixes first, and if those do not work, go to the clutch or bushing to get it free. Check the reel's reverse switch to ensure it is not stuck or in the reverse position.

Many modern reels have this switch to the side of the reel, usually near the spring bail or thumb button. Unscrew the housing cap. If your spinning reel feels stiff, and the handle is hard to turn, this is most often caused by salt or sand getting inside the body, and forming deposits on the gears and other internal parts. However, in some cases, this problem can also be due to too much grease on the gears, or the wrong grease or oil having been used on the internal parts.

How to fix it: in order to fix a stiff fishing reel, you need to take it apart, and then clean and degrease the internal parts, followed by adding new grease and oil to the appropriate parts. For more details check our article on how to maintain a spinning reel. There are two issues that usually cause this, and fortunately, both of them can be fixed. How to fix it : a defective anti reverse is often due to a spring that normally attaches the anti reverse gear to the rotor being broken, or not properly connected.

If the latter is the case, the spring can usually be reconnected quite easily. The second common reason for a defective anti reverse is due to the hammer of the anti reverse getting caught on the latching gear. In order to fix this, the bushing inside the gear needs to be taken out and then reinserted with a suitable adhesive, to stop it from moving inside the gear. If your spinning reel keeps getting tangled, or throwing off wind knots, this is usually due to line twist, which can be caused either by incorrect spooling, or by using lures or rigs that twist the line while fishing.

It all comes down to 3 different parts on your fishing reel. To make sure you find the right answer to your problem, we have listed the possible solutions below. The most common reason for this problem comes down to the anti-reverse switch of your fishing reel. We will mention more about this later. While this is an issue, it does not have to mean that your anti-reverse is broken. The Anti-reverse on a spinning wheel is an important feature.

It keeps the real from going backward engages the drag. Sometimes the Anti Reverse on a fishing reel comes with a switch. This switch will allow you to choose if the feature is engaged or not. However, back reeling is not always the best option for fishing. This can be dangerous if the fish is just too large. For this reason, the switch exists in the first place. The anti-reverse is supposed to spin backward, but not always.

This is why you should check the anti-reverse first to see if it is engaged or not. However, if you still have problems with your anti-reverse going both ways, there are several things to go through. The Bail acts as a gate for the line on the spool. When you engage the bail, you prevent the line from unwinding from the spool.